|
|
ATPG
Bentgrass Putting Green surface
(3/8" to 11/16")
was developed to give the golfer and their
families a high quality training tool for their
backyard. Plus it's priced to fit
almost any backyard recreational putting green
budget. |
|
|
|
|
|
The Bentgrass Technology
Achieve A Perfect Putting
Green Surface before any impact material
is ever added to your new bentgrass backyard green.
Note: Impact material is applied with a drop
spreader, and we recommend a clean and dry sand,
copper slag, or coal slag. |
|
|
|
|
|
Your New Bentgrass
Putting Green rolls an 11 to 11.5 on the stimp
meter the day you roll it out on your sub-base.
That's right, a perfect roll at an 11+ on the
stimp-meter before you add any impact material. |
|
|
|
|
|
Professional Golfers
Throughout The PGA And LPGA
choose our adjustable bentgrass
polypropylene practice
putting greens over nylon because of its
realistic characteristics. |
|
|
 |
|
Realistic Made Just That
Easy... |
See Old Vs. New Technology
|
|
| |
| Our New
BentGrass Putting Green Technology
revolutionized the old polypropylene fibers and gives
you the most realistic putting green surface on the
market today. We now offer the only Pre-bent
Non-directional TM technology on the market today. |
| |
This
Technology Has Several benefits
like (a) tougher fibers that are Pre-bent
Non-directional
TM (b)
easy adjustable stimp speed
(c)
better ball action (d) reduces putting green installation
time by better than half.
Pre-bent Non-directional
-
We start with an approximate 5/8" - 1" fiber and then
we reduce it (pre-bend) to a 3/8" - 11/16" finished
height by means of our new manufacturing process. This
ensures you that the end results will be an actual well
dressed putting green surface that does not require a
seasoned installer.
Non-Directional Fibers
will never
lean one direction like the old technology. The leaning
of the fibers will cause a huge speed
difference depending on if you are putting against the
grain or with the grain. In the past, it has taken a
tremendous amount of effort
(labor and know-how) to
eliminate this problem when using the old polypropylene
straight fiber putting green material.
|
|
|
 |
|
|
|
"By creating the new
Pre-Bent Non-Directional
TM polypropylene
material, ATPG has made it affordable and easier
for the average golfer to have a realistic
practice putting green in their own backyard."
Chris G.
Pacific
Grove, CA |
|
|
|
|
|
|
|
Professional installers
appreciate ATPG NEW Polypropylene Technology |
|
One of the major drawbacks of the
old
polypropylene material was that it took a great
deal of labor and know how to install a quality
project. Truly not for the do it yourselfer
(DIY). |
|
|
|
P R I C I N G |
|
click on photo for our factory direct
pricing |
|
|
Kits w/ CUPS,
FLAGS & 30" POLES
(includes
to your door shipping) |
|
|
 |
|
(includes to your door shipping) |
|
|
 |
|
| Custom
Orders Are Our Specialty 660.851.0300 |
 |
|
|
Design - Specification -
Installation
Need
Help? - Just
simply contact us:
Email
or Call 660.851.0300 |
| |
|
|
AT&PG offer our customers
the most realistic second cut fringe on the
market today.
Where our
competitors offer a material that we sell as
the rough - not fringe... |
|
 |
|
|
|
|
Sample Instructions:
Putting Green
Installation
 |
|
After rough cutting the fringe
material, put it in place and nail down
the outer edge (use galvanized 6" or 7"
gutter spike). Lift up the putting green
surface and place the fringe pieces under the
putting green surface. Now you can use the
putting green edge as a template to cut your
fringe.
NOTE: Cut along the edge with
a good sharp
utility knife...
Full instruction
info. available to customers, as well as phone
support.
|
|
| |
FREE
Helpful Tool To Building Your Own Putting Green
Fact
Finding First |
| |
|
|
 |
|
|
|
Need Help designing your
new backyard putting green area?
|
Login Status
